Subject: SWFA reticle adjustments
Posted: April/18/2013 at 23:20
I recently purchased a SWFA SS-HD 5-20x50 (MRAD) FFP scopeand was getting ready to install it on my rifle. Prior to doing so I wasrunning the windage and elevation stops to get the cross-hairs centered andnow I have a question.
This particular scope should have 30 mils of total adjustment. However, when Iran the vertical (elevation) it had a total of 40.3 mils of adjustment whilethe horizontal (windage) only had 20.5 mils of adjustment. Any ideas as to whyboth the vertical and horizontal adjustments are off?
Personally I could care less about only having 20 mils of windage because Iwill end up using the reticle mils for any windage holds. As much as I would liketo have 40+ mils of elevation adjustment (no need for a 20 moa base on my .308)I just want to make sure that there isn't something wrong with the scope ifit's actually supposed to have a set 30 mils of travel both vertically andhorizontally.
By the way, the glass on this scope is fantastic and I really look forward toputting it to use. Thanks in advance for your help and feedback.