Author: 3_tens
Subject: Rimfire out of adjustment
Posted: March/30/2014 at 10:04
What Ruger you have? Is it the 10-22
What type of rings are you using, Are you attaching via the dovetail of using a 2 piece or rail.
Problems are usually in the mounting system used.
Some times the Rugers just need the barrel tightened. Instead of being threaded into the receiver, they just slip in and are held in place with a screw. If they aren't good and tight the barrel can sag.
Welcome to the OT. There are several members that know a lot more about the Rugers Rifles than I do.
Subject: Rimfire out of adjustment
Posted: March/30/2014 at 10:04
What Ruger you have? Is it the 10-22
What type of rings are you using, Are you attaching via the dovetail of using a 2 piece or rail.
Problems are usually in the mounting system used.
Some times the Rugers just need the barrel tightened. Instead of being threaded into the receiver, they just slip in and are held in place with a screw. If they aren't good and tight the barrel can sag.
Welcome to the OT. There are several members that know a lot more about the Rugers Rifles than I do.